CCM-1N-S
Solar Powered Cellular Control Module
Take all of the features of the CCM-1N, remove the 12 VDC power supply, add a solar controller and high efficiency solar panels, and you have a sustainable cellular access system capable of controlling most any electric lock. Everything you need is included - Solar panel, solar controller, NEMA-3R wall mount enclosure, lead acid battery and pole mounting brackets for Cellular Control Module and solar panel.
Features and Benefits
- Complete out of the box Solar Powered Access Control System
- Create custom access codes and time expirations
- Review and manage access activity and history
- Receive immediate notification of activity at all openings
- Cell phone and internet driven
- One SPST relay output - 2 Amp maximum
- Three inputs (REX, auto-relock and lock monitoring)
- Works with most any fail secure electric lock
- No software necessary
- Available in 10W and 20W versions
- Outdoor operation
- 100% Solid State Solar Controller
- Low voltage battery monitor to protect batteries from deep discharge
- Included mounting brackets for Cellular Control Module and solar panel accommodate up to 2" diameter pole
- Optional mounting brackets available to mount power supply enclosure to 3" diameter pole
- Optional solar wind kit available for high wind areas
SPK - Included Solar Panel Mounting Kit
PMK-3 - Optional Large Pole Mounting Kit
SWK - Optional Solar Panel High Wind Kit for 20W Panel
Specifications
Enclosure:
Dimensions:
Outdoor (NEMA-3R) - 12.8" x 13.6" x 4.7" (325mm x 345mm x 119mm)
(Up to four 12VDC 5 Amp hour lead acid batteries can be used inside)
Battery Operating Temperature: -40 to +140F [-40 to +60C]
Standard Mounting Brackets: Accommodates up to 2" diameter pole
Solar Panels:
CCM-1N-S10
Size: 14.5" x 12.2" x .7" (368mm x 310mm x 18mm)
Rated Power: 10 Watts
Weight 3.3 lbs
CCM-1N-S20
Size: 22" x 14.2" x .7" (560mm x 360mm x 18mm)
Rated Power: 20 Watts
Weight: 5.5 lbs
Panel(s) Operating Temperature: -40 to +185F [-40 to +85C]
Panel(s) Type: High-efficiency photovoltaic modules using silicon nitride multicrystalline cells
Controller: Anodized aluminum case with marine rated terminals
100% solid state
Fully encapsulated in epoxy potting
Green charging LED
Approved for use in hazardous locations - Class 1, Division 2, Groups A, B, C, D
Voltage Output: 14.4 VDC maximum
Specification Data
Operating temperature:
Without battery backup -22 to +140F [-30 to +60C]
With battery backup -4 to +113F [-20 to +45C]
Current Draw @ 12VDC:
NOTE: Current draw does not include locking device
Cellular components: Up to 30mA at rest, up to 95mA operating (CCM-1)
Warranty: SecuriCare 3 Year NO FAULT Warranty